The honeycomb panel produced by our company adopts hot press forming technology. Due to the high heat conduction value between the aluminum skin and the honeycomb, the thermal expansion and contraction of the inner and outer aluminum skins are synchronized; the honeycomb aluminum skin has small holes, so that the gas in the plate can flow freely; The sliding mounting buckle system does not cause structural deformation during thermal expansion and contraction. The panel is mainly made of high quality 3003H24 alloy aluminum plate or 5052AH14 high manganese alloy aluminum plate as the base material. The thickness of the panel is 0.8~1.5mm fluorocarbon roller coated plate or light resistant paint. The color resistant paint is resistant to scratches, acid rain and corrosion. The cleanliness is stronger than PVDF, the thickness of the bottom plate is 0.6~1.0mm, and the total thickness is 25mm.
The core material adopts hexagonal shape 3003 aluminum honeycomb core, the thickness of aluminum foil is 0.04~0.06mm, and the side length is 5~6mm. The forming of the front and back skins is completed by roll forming technology. The fully automatic machine equipment is folded, and the front and back skins are installed. Tightly bite. The inner layer is a special hexagonal aluminum honeycomb made of an aluminum alloy having a hardness of H19. As a core plate adhered to the sandwich structure, it is subjected to pressure in the tangential direction. These mutually confined dense cells are like many small I-beams, which can disperse the pressure from the direction of the panel and make the plate evenly stressed, ensuring that the panel can maintain a high degree of flatness even in a large area.

1
Total: 1 page
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...