Home  > PRODUCT  > 5 Series aluminum material  >  5052 H32 Decorated Alloy Aluminum Sheet Quality Assurance
5052 H32 Decorated Alloy Aluminum Sheet Quality Assurance

5052 H32 Decorated Alloy Aluminum Sheet Quality Assurance

provide sample
Yes
Packaging requirements
Wooden frame packaging
Payment Term
T/T,L/C
Price term
FOB, CFR, CIF, EXW
Port
Guangzhou
Yield
10000Ton/TonsPerMonth
Quantity(Metric Tons)
1 - 3 />3
Est. Time(day)
30 /To be negotiated
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:

Those aluminum plates with a smooth surface are coated on the surface of the aluminum plate. Just like our mobile phone, a film processing on the screen of the mobile phone can prevent our mobile phone screen from being scratched or damaged. The effect of the aluminum foil film is similar to that of the mobile phone film.


The main function of the aluminum plate is to protect the surface of the aluminum plate. Whether it is stored or transported, or used, it will damage the surface of the aluminum plate more or less, so the aluminum film is indispensable.


After the aluminum sheet is filmed, the surface of the aluminum sheet can be effectively prevented from being scratched and chemically corroded. Generally, the aluminum sheet is applied to products requiring harsh surfaces on the surface of the aluminum sheet. The surface of the aluminum plate can be ensured to a certain extent during the processing.


After the aluminum sheet is coated, a certain cost is added, and after the processing, the protective film is removed, so that it is not necessary for the products whose surface is not high to be coated. At the same time, we also choose a high quality protective film when choosing a protective film. If a poor quality protective film is selected, there may be residual offset on the surface of the aluminum plate after the film is removed. Therefore, the aluminum sheet coating should be selected according to actual needs and used reasonably.



product features
Canyi


                           
5052 aluminum plate
The 5052 aluminum plate is an AL-Mg alloy aluminum plate. Magnesium is the main alloying element in the 5052 alloy aluminum plate. It is the most widely used rust-proof aluminum. The alloy has high strength, especially fatigue resistance: plasticity and corrosion resistance. High in nature, can not be heat-treated, plasticity is good in semi-cold hardening, low in plasticity during cold hardening, good in corrosion resistance, good weldability, poor machinability and polishing.
                           
5052 aluminum plate
The aluminum-magnesium alloy also contains a small amount of manganese, chromium, niobium, titanium, and the like. Most of the manganese in the alloy forms MnAl6 except for a small amount of solid solution. In the 5052 aluminum plate, the effect of chromium is similar to that of manganese, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%.
                           
Surface Quality

1. Surfaces are not allowed to have cracks, corrosion spots and traces of nitrate.

2. The surface shall be allowed to have peeling, air bubbles, surface roughness and local mechanical damage with a depth not exceeding 8% of the nominal thickness of the part where the defect is located, but the maximum depth of the defect shall not exceed 0.5 mm, and the total area of the defect shall not exceed the total area of the plate. 5%.

3. Allow the supplier to illuminate the profile longitudinally to a smooth surface.

4. Other requirements: There are demanders and suppliers to draw up their own.


                           
5052 aluminum plate specifications

The thickness of the aluminum plate is: 0.15mm-50mm, the width is: 100mm-2000mm, and the length is: 1000mm-9000mm.

Aluminum coil thickness: 0.05mm-15mm, width: 15mm-2000mm

Insulation aluminum plate thickness: 0.3mm-0.9mm Width: 500mm-1000mm Length: no limit

Non-slip aluminum plate thickness: 1mm-10mm Width: 1000mm-1500mm Length: 2000-3000mm

Embossed aluminum plate thickness: 0.1mm-0.9mm Width: 500mm-1200mm Length: no limit



Product parameters
Canyi


Tempering

O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34H36,H38,H111,H112,H114,H 116,H321

Surface

mill,bright,polished,hair line,brush,sand blast,checkered,embossed,etching,etc

Thickness

0.1-150mm

diameter

2-2500mm

Length

1~2 meters or as required

Thickness tolerance

+ 0.05mm

Width / length tolerance

+ 2mm

Minimum quantity

5-10 tons

Chemical Compositon of Aluminum
Canyi


Grade

Chemical Composition(%)

Others

AI

 

Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Single

Tol

99.5

1050

0.25

0.4

0.05

0.05

0.05

-

0.05

0.03

0.03

-

99.6

1060

0.25

0.35

0.05

0.03

0.03

-

0.05

0.03

0.03

-

99.7

1070

0.2

0.25

0.04

0.03

0.03

-

0.04

0.03

0.03

-

99

1100

0.95

0.05~0.4

0.05

-

-

0.1

-

0.05

0.15

Remains

3003

0.6

0.7

0.05~0.2

1.0~1.5

-

-

0.1

-

0.05

0.15

Remains

3004

0.3

0.7

0.25

1.0~1.5

0.8

-

0.25

-

0.05

0.15

Remains

3005

0.6

0.7

0.3

1.0~1.5

0.2~0.6

0.1

0.25

0.1

0.05

0.15

Remains

3105

0.6

0.7

0.3

0.3~0.8

0.2~0.8

0.2

0.4

0.1

0.05

0.15

Remains

5052

0.25

0.4

0.1

0.1

2.2~2.8

0.15~0.35

0.1

-

0.05

0.15

Remains

5083

0.4

0.4

0.1

0.4~0.1

4.0~4.9

0.05~0.25

0.25

0.15

0.05

0.15

Remains

5754

0.4

0.4

0.1

0.5

2.6~3.6

0.3

0.2

0.15

0.05

0.15

Remains

5005

0.3

0.7

0.2

0.2

0.5~1.1

0.1

0.25

-

0.05

0.15

Remains

5086

0.4

0.5

0.1

0.2~0.7

3.5~4.5

0.05~0.25

0.25

0.15

0.05

0.15

Remains

6063

0.2~0.6

0.35

0.1

0.1

0.45~0.9

0.1

0.1

0.1

0.05

0.15

Remains

6041

0.4~0.8

0.7

0.15~0.4

0.15

0.04~0.35

0.04~0.35

0.25

0.15

0.05

0.15

Remains

flow chart
Canyi

Market application
Canyi


5052 alloy aluminum plate is widely used in the manufacture of fuel tanks, oil pipes and transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, molds, etc. It can also be used for low load parts that require high plasticity and good weldability in liquid or gaseous media, such as fuel tanks, gasoline or lube oil conduits, various liquid containers and other small load parts made with deep drawing: The wire is used to make rivets.

               

Silo for aluminum


               

Heavy truck air reservoir


               

Brushed aluminum plate for notebook back

               

Alloy aluminum plate for fuel tank


Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...